Initial release

resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json

@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Creality Generic ABS @Ender-3V3-all",
+    "inherits": "Creality Generic ABS",
+    "from": "system",
+    "setting_id": "GFSA04_CREALITY_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "compatible_printers": [
+        "Creality Ender-3 V3 SE 0.2 nozzle",
+        "Creality Ender-3 V3 SE 0.4 nozzle",
+        "Creality Ender-3 V3 SE 0.6 nozzle",
+        "Creality Ender-3 V3 SE 0.8 nozzle",
+        "Creality Ender-3 V3 KE 0.4 nozzle",
+        "Creality Ender-3 V3 0.4 nozzle",
+        "Creality Ender-3 V3 0.6 nozzle",
+        "Creality Ender-3 V3 Plus 0.4 nozzle",
+        "Creality Ender-3 V3 Plus 0.6 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic ABS @Ender-5Max-all.json

@@ -0,0 +1,107 @@
+{
+    "type": "filament",
+    "name": "Creality Generic ABS @Ender-5Max-all",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "setting_id": "GFSA04_CREALITY_00",
+    "filament_id": "07001",
+    "instantiation": "true",
+    "activate_air_filtration": "0",
+    "activate_chamber_temp_control": "0",
+    "additional_cooling_fan_speed": "0",
+    "chamber_temperature": "35",
+    "close_fan_the_first_x_layers": "3",
+    "compatible_printers": [
+        "Creality Ender-5 Max 0.4 nozzle"
+    ],
+    "complete_print_exhaust_fan_speed": "80",
+    "cool_plate_temp": "90",
+    "cool_plate_temp_initial_layer": "90",
+    "cool_special_cds_fan_speed": "0",
+    "default_filament_colour": "\"\"",
+    "during_print_exhaust_fan_speed": "60",
+    "enable_overhang_bridge_fan": "1",
+    "enable_pressure_advance": "1",
+    "eng_plate_temp": "105",
+    "eng_plate_temp_initial_layer": "105",
+    "fan_cooling_layer_time": "30",
+    "fan_max_speed": "20",
+    "fan_min_speed": "20",
+    "filament_cooling_final_speed": "3.4",
+    "filament_cooling_initial_speed": "2.2",
+    "filament_cooling_moves": "4",
+    "filament_cost": [
+        "15"
+    ],
+    "filament_density": [
+        "1.08"
+    ],
+    "filament_deretraction_speed": "nil",
+    "filament_diameter": "1.75",
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ],
+    "filament_flow_ratio": "0.85",
+    "filament_is_support": "0",
+    "filament_load_time": "0",
+    "filament_loading_speed": "28",
+    "filament_loading_speed_start": "3",
+    "filament_max_volumetric_speed": [
+        "35"
+    ],
+    "filament_minimal_purge_on_wipe_tower": "15",
+    "filament_multitool_ramming": "0",
+    "filament_multitool_ramming_flow": "10",
+    "filament_multitool_ramming_volume": "10",
+    "filament_notes": "\"\"",
+    "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
+    "filament_retract_before_wipe": "nil",
+    "filament_retract_lift_above": "0",
+    "filament_retract_lift_below": "0",
+    "filament_retract_lift_enforce": "All Surfaces",
+    "filament_retract_restart_extra": "0",
+    "filament_retract_when_changing_layer": "nil",
+    "filament_retraction_length": "nil",
+    "filament_retraction_minimum_travel": "nil",
+    "filament_retraction_speed": "nil",
+    "filament_shrink": "100%",
+    "filament_soluble": "0",
+    "filament_start_gcode": [
+        "; Filament gcode\n"
+    ],
+    "filament_toolchange_delay": "0",
+    "filament_type": [
+        "ABS"
+    ],
+    "filament_unload_time": "0",
+    "filament_unloading_speed": "90",
+    "filament_unloading_speed_start": "100",
+    "filament_vendor": [
+        "Creality"
+    ],
+    "filament_wipe": "nil",
+    "filament_wipe_distance": "nil",
+    "filament_z_hop": "nil",
+    "filament_z_hop_types": "nil",
+    "full_fan_speed_layer": "0",
+    "hot_plate_temp": "90",
+    "hot_plate_temp_initial_layer": "90",
+    "nozzle_temperature": "260",
+    "nozzle_temperature_initial_layer": "260",
+    "nozzle_temperature_range_high": "260",
+    "nozzle_temperature_range_low": "230",
+    "overhang_fan_speed": "20",
+    "overhang_fan_threshold": "25%",
+    "pressure_advance": "0.03",
+    "reduce_fan_stop_start_freq": "1",
+    "required_nozzle_HRC": "0",
+    "slow_down_for_layer_cooling": "1",
+    "slow_down_layer_time": "5",
+    "slow_down_min_speed": "10",
+    "support_material_interface_fan_speed": "-1",
+    "temperature_vitrification": [
+        "110"
+    ],
+    "textured_plate_temp": "90",
+    "textured_plate_temp_initial_layer": "90"
+}

resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json

@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "name": "Creality Generic ABS @Hi-all",
+    "inherits": "Creality Generic ABS",
+    "from": "system",
+    "setting_id": "GFSA04_CREALITY_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n"
+    ],
+    "compatible_printers": [
+        "Creality Hi 0.4 nozzle",
+        "Creality Hi 0.6 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic ABS @K1-all.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Creality Generic ABS @K1-all",
+    "inherits": "Creality Generic ABS",
+    "from": "system",
+    "setting_id": "GFSA04_CREALITY_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Creality K1C 0.4 nozzle",
+        "Creality K1C 0.6 nozzle",
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json

@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Creality Generic ABS @K2-all",
+    "inherits": "Creality Generic ABS",
+    "from": "system",
+    "setting_id": "GFSA04_CREALITY_00",
+    "instantiation": "true",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "filament_start_gcode": [
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
+    ],
+    "compatible_printers": [
+        "Creality K2 0.2 nozzle",
+        "Creality K2 0.4 nozzle",
+        "Creality K2 0.6 nozzle",
+        "Creality K2 0.8 nozzle",
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle",
+        "Creality K2 Pro 0.2 nozzle",
+        "Creality K2 Pro 0.4 nozzle",
+        "Creality K2 Pro 0.6 nozzle",
+        "Creality K2 Pro 0.8 nozzle"
+    ]
+}